环氧地坪漆主要用于车间、仓库、超市、机修车间的无锡环氧地坪油漆。对平板混凝土地面具有良好的防滑、防潮、防尘效果。在不同的应用场合,其性能也各不相同,工厂内也有许多工厂,对其耐磨性、耐压性和防滑性能要求保证在拉货间隔内,不能因路面过滑而造成车辆事故。
环氧地坪漆施工影响因素
Influencing factors of epoxy floor paint construction
由于一些车间经常运输一些含有腐蚀剂的工业材料,这就要求环氧地坪具有更好的耐酸碱性能。在工业装置中使用这些试剂、稀释剂等,将对地面造成损害,具有足够的耐腐蚀性,以确保表面不被化学腐蚀所破坏。
Because some workshops often transport some industrial materials containing corrosives, it requires epoxy flooring to have better acid and alkali resistance. The use of these reagents and diluents in industrial plants will cause damage to the ground and have sufficient corrosion resistance to ensure that the surface is not damaged by chemical corrosion.
环氧地坪漆会脱落,往往是由于粘合力不足,环氧地坪材料质量差,粘合力达不到标准,所以很容易在特定使用过程中分解脱落一段时间,或重量过大时。
Epoxy floor paint will fall off. Often due to insufficient adhesion, poor quality of floor materials and poor adhesion, it is easy to decompose and fall off for a period of time in a specific use process, or the weight is too old.
如果涂层质量不好,在涂装过程中也容易产生色差,对地坪的美观也有很大的影响。
If the quality of the coating is not good, it is easy to produce chromatic aberration in the painting process, which also has a great impact on the aesthetics of the floor.
那么除了材料,还有其他因素会影响楼地面施工质量吗?有的。
So in addition to materials, there are other factors that will affect the quality of floor construction? Yes, we have.
涂装前对表面的探索,无论是过湿,还是温度过高还是过低,由于混凝土表面质量不同,施工效果也会有相应的差异,有些混凝土比较容易产生抗碱问题,在涂装前,相应的酸化处理也会影响施工质量。
Surface exploration before painting, whether it is too wet, or too high or too low temperature, because of the different surface quality of concrete, the construction effect will also have corresponding differences, some concrete is relatively easy to produce alkali resistance problems, before painting, the corresponding acidification treatment will also affect the construction quality.
环氧地坪漆施工涂刷过程
Construction Brushing Process of Epoxy Floor Paint
平整度也是影响工程质量的一个重要因素。有些地坪在上漆前有许多洞,而且凹凸不平。如果打磨不好,油漆的效果会变差。
Flatness is also an important factor affecting engineering quality. Some floors have many holes in front of the paint and are uneven. If the polishing is not good, the effect of paint will be worse.
正确的施工步骤还应包括材料的比率、所用工具的选择和购买,例如滚筒刷的专用工具的应用,从而使刷子的质量更好。
Correct construction procedures should also include the ratio of materials, the selection and purchase of tools used, such as the application of special tools for roller brushes, so as to improve the quality of brushes.
不同的功能车间对环氧树脂施工有不同的要求。例如,电子车间通常考虑防静电和防尘,而材料车间对防滑、耐磨和压缩的要求更高。
Different functional workshops have different requirements for epoxy resin construction. For example, electronics workshop usually considers anti-static and anti-dust, while material workshop has higher requirements for anti-skid, anti-wear and compression.
在涂装过程中,根据需要进行选择,使涂装的效果更适合于原来的要求。当然,如果有相对个性化的要求,我们应该与环境和周围的建筑相匹配,以作出具体的安排。
In the process of painting, according to the need to choose, so that the effect of painting more suitable for the original requirements. Of course, if there are relatively personalized requirements, we should match the environment and the surrounding buildings to make specific arrangements.
从这些角度,你可以知道无锡环氧地坪漆的质量是好是坏。具体采购还可以运用一些小技巧,如承重、嗅觉、看标签品牌、质量检测等,可以